Living and Home Double Bowl Quartz Resin Composite Kitchen Sink with Waste Kit, Graphite Grey

Description
Make everyday kitchen tasks easier with this sleek double-bowl kitchen sink. Featuring two separate basins, it makes washing and rinsing effortless while food prep stays organised and uninterrupted. An integrated drainer on the right provides a convenient space for drying plates, cutlery, and freshly rinsed ingredients. Smooth rounded corners keep water flowing and reduce hard-to-reach grime, so cleaning feels quicker after busy cooking. A complete waste kit is included for straightforward, easy installation and a hassle-free setup.

Features
• [Quartz Resin Composite Build]: One-piece construction resists daily wear, stains, and high temperatures.
• [Standard 35mm Tap Hole]: Pre-drilled opening enables quick tap installation without additional modifications.
• [Overflow Protection]: A built-in overflow port helps prevent accidental water spills when the sink is left unattended.
• [Clog & Odour Control]: A removable basket strainer catches food debris, while a lid blocks odours and holds water when needed.

Specifications
Overall Dimensions: 115cm (W) x 49cm (D) x 21cm (H)
Pre-Drilled Faucet Hole Diameter: 35mm
Overflow Hole Diameter: 30mm
Material: Quartz Resin Composite + 201 Stainless Steel
Colour: Graphite Grey
Shape: Rectangular
Type: Double Bowl
Number of Tap Hole(s): 1
Tap Included: No
Installation Type: Under-mount
Assembly Required: Yes

Package Content
1 x Double Bowl Sink
1 x Waste Kit

Package Specifications
Package Dimensions (W x D x H): 126cm x 60cm x 33cm
Gross Weight: 31kg

Notes
- Lift with care. The sink is heavy. Use proper lifting techniques or seek assistance to avoid back strain or injury.
- Always wear eye protection and cut-resistant gloves when cutting the countertop or drilling holes. Flying debris or tool slips can cause serious injury.
- Despite efforts for accuracy, there may be some reasonable error due to manual measurement.
- Actual product colours may vary due to monitor settings and lighting.

Installation Instructions
- Turn the sink upside down and place it exactly where you want to install it on the countertop.
- Measure the width, length, and depth of the sink.
- Ensure there is sufficient space to install a battery outlet located under the sink.
- Mark the location of the sink by tracing its perimeter. Then remove the sink from the countertop.
- Draw a cut line inside the perimeter that will copy the original wrap around the sink but will be shifted by 12 mm.
- If the sink comes with a template for the sink cutout, use the template for tracing.
- Ensure the template is placed correctly.
- When you are sure of the placement, drill a hole big enough to accept the blade from your jigsaw at any point along the cut line. With a jigsaw, cut the opening along the cut line (the line inside the sink's perimeter line).
- Before stamping the faucet's hole, check the location of the pre-drilled hole at the bottom.
- Using a drill with a drill bit ø3 mm, drill holes around the edge of the pre-drilled hole. Hold a sharp pointed object (e.g., a screwdriver) and a hammer and strongly wallop in the middle of the pre-drilled hole. Then clean up the hole with rasps.
- Before installing the sink, apply sanitary silicone (not included) on its inner edge.
- Carefully flip the sink and insert it into the hole in the countertop. Then install the other parts of the siphon.