
Light and heat retention
Clear polycarbonate panels allow maximum light transmission while retaining heat inside the cold frame.
Give your plants and vegetables somewhere to enjoy the sunshine and grow healthily, thanks to this small wooden greenhouse from Outsunny. The wooden frame is solid and keeps its shape, with a top paint coating for extra protection. The clear polycarbonate… More
Free UK deliveryGet it by Thu 12th NovemberAllow light through while retaining heat.
Coated with paint for protection.
Provide access and fresh air.

Clear polycarbonate panels allow maximum light transmission while retaining heat inside the cold frame.

Two lifting roof panels provide access to plants and fresh air when needed.

The solid wood frame has a coat of paint for protection.
| Brand | Outsunny |
|---|---|
| Weight (kg) | 6.5 |
| Width (cm) | 50 |
| Height (cm) | 36 |
| Depth (cm) | 100 |
| Material | Fir Wood |
| Colour | Natural |
| Cover material | PC Panel |
|---|---|
| Planting area dimensions | 97W x 48D cm |
| Snow load capacity (kg/m²) | 30 kg/m² |
| Windproof level | 4 |
| Condition | New |
| SKU | 845-538ND |
Free delivery · Get it by Thu 12th November.
The item should be returned in its original condition and packaging. If the item has been used, we may deduct an amount from the refund to account for the diminished value of the item due to handling. You will be notified accordingly.There was an issue with the first one that was sent, but the company where fantastic and rectified this straightaway...i would highly recommend the company and the item is great and just want i wanted for my outdoor kitchen area...
The cold frame is a very soft pine like wood. The instructions state not to use power drill when building. However the four sections come with corner pieces that are glued and pinned. On fitted the two side panels to the front panel with the supplied screws. I attempted picked pick the three pieces up to turn and fit the back panel. On lifting the glue and pins failed to take the weight and came apart. I then had to ignore the "No Drill" instruction and refit the Front panel to the pieces of wood and the side panels pre-drilling the panel. Preempting the same problem to the rear panel, pre-drilled and screwed again. The construction is much lighter that I would have expected of pine, I therefore feel that I needs some weight to prevent it being moved in gusts of wind. I will need to devise a means to do this. The top surface is plastic in a pine frame. These doors will need to be secured probably with cabin hooks again to prevent gusts blowing them open and damaging them. The four panels are constructed of several lengths of wood glued together as is the norm these days. Together with the corner pieces of wood mentioned earlier act as ribbing with two pieces of wood centrally glued and pined to the inside, These too, I considered needed screwing down for security. All in all, a reasonable size cold frame that will hold up to four seed trays amd paraffin heater, which is more than an adequate size for my needs. had it not been for the construction issues above, it would have been easy to build.
Ideal for the place that i what'd it to go in.Delievery a day later than seid but ok.
Good size.good for starting off growing seeds.
Solid and well made